Camry V6-3.5L (2GR-FE) (2008)
NOTE: Securely apply the double-sided tape to prevent it from being out of alignment and peeling off.
(b) Peel off the release paper from the double-sided tape.
(c) Attach the No. 1 roof wire along the double-sided tape so that the marking surface of the wire harness faces downward.
NOTICE:
-
Securely attach the No. 1 roof wire.
-
Failure to do so may cause abnormal noise.
(d) Apply adhesive tape to locations shown in the illustration.
HINT: As shown at point A in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining
assembly.
2. INSTALL NO. 1 ROOF WIRE (w/ Sliding Roof)
(a) Apply new double-sided tape to locations shown in the illustration while aligning the tape with the markings on the roof headlining.