Camry V6-3.5L (2GR-FE) (2008)
(a) Remove the protective cover.
(b) Install a new clip [A] on the front pillar garnish RH.
(c) Engage the 2 claws and 2 clips, then install the front pillar garnish RH.
30. INSTALL ROOF SIDE INNER GARNISH LH
(a) Engage the 5 clips and 2 claws, then install the roof side inner garnish LH.
31. INSTALL ROOF SIDE INNER GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.
32. INSTALL UPPER CENTER PILLAR GARNISH LH
(a) Engage the clip.
(b) Install the upper center pillar garnish LH with the bolt.
33. INSTALL LOWER CENTER PILLAR GARNISH LH