Camry V6-3.5L (2GR-FE) (2008)
DOOR LOCK: FRONT DOOR LOCK:
INSTALLATION
1. INSTALL FRONT DOOR LOCK ASSEMBLY
NOTICE:
-
When reusing the removed front door lock assembly, replace the door lock wiring harness seal on the door lock with a new one.
-
Do not allow grease or dust to adhere to the surface of the door lock where the seal attaches.
-
Reusing the door lock wiring harness seal or using a damaged door lock wiring harness seal may allow water intrusion to the connection,
and result in a malfunction in the front door lock assembly.