Camry V6-3.5L (2GR-FE) (2008)
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (See: Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly)
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG (See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly)
3. REMOVE ASSIST GRIP COVER (See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly)
4. REMOVE COURTESY LIGHT ASSEMBLY (See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly)
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly)
6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP (See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Disassembly)
7. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 screws and the power window regulator master switch assembly.
Installation
DOOR LOCK: DOOR CONTROL SWITCH:
COMPONENTS