Camry V6-3.5L (2GR-FE) (2008)
Brake Pedal Assy: Service and Repair
Installation
BRAKE: BRAKE PEDAL:
INSTALLATION
1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
(a) Temporarily install the brake pedal support assembly with the bolt.
NOTE: Fully tighten the bolt after installing the brake booster assembly.
(b) Temporarily install the No. 1 brake pedal support plate with 2 bolts (A) and bolt (B).
NOTE: Fully tighten 2 bolts (A) and bolt (B) after installing the brake booster assembly.
(c) Temporarily install the brake booster assembly and the gasket with the 4 nuts.
(d) Fully tighten the bolt.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
(e) Fully tighten 2 bolts (A) and bolt (B).
Bolt (A) - Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
Bolt (B) - Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)