toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brakes - Uneven Rear Brake Pad Wear|Page 5782 > < Brakes - Vibration/Pulsation When Braking|Page 5776
Page 1
background image

Brake Rotor/Disc: All Technical Service Bulletins
Brakes - Uneven Rear Brake Pad Wear

T-SB-0366-10

December 23, 2010

Uneven Rear Brake Pad Wear

Service Category
Brake

Section
Brake (rear)

Market 
USA

Applicability

Introduction

Some 2007 - 2011 Camry vehicles may exhibit uneven rear brake pad wear due to corrosion between the pad backing plate and mounting bracket. The
outer pad may wear more at the top of the pad versus the bottom. The vehicle may also exhibit a grinding noise during braking due to metal-to-metal
contact between the rotor and the pad backing plate. Follow the procedures in this bulletin to address this condition.

Production Change Information

This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown.

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,
from the vehicle's in-service date.

^

Warranty application is limited to occurrence of the specified condition described in this bulletin.

Brakes - Uneven Rear Brake Pad Wear|Page 5782 > < Brakes - Vibration/Pulsation When Braking|Page 5776