Camry V6-3.5L (2GR-FE) (2008)
/Page-1525002.png)
Parts Information
Repair Procedure
1. Confirm the complaint condition (grinding noise from the rear brakes and uneven rear pad wear due to corrosion between the pad backing plate and
mounting bracket).
2. Replace the Rear Brake Pads and Caliper/Pad Mounting Brackets (both sides).
3. Machine or replace rear rotors as needed.
Refer to the Technical Information System (TIS) applicable model and model year Repair Manual:
4. Confirm that the grinding noise is gone and that the rear brakes are operating properly.
