Camry V6-3.5L (2GR-FE) (2008)
Steering Angle Sensor: Service and Repair
Installation
BRAKE CONTROL: STEERING ANGLE SENSOR (w/ VSC):
INSTALLATION
1. INSTALL STEERING ANGLE SENSOR
(a) Align the locating pins, engage the claws, and install the steering angle sensor to the spiral cable.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR (See: Restraint Systems/Air Bag Systems/Clockspring
Assembly / Spiral Cable/Service and Repair/Installation)
3. INSTALL STEERING COLUMN COVER (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
4. ADJUST SPIRAL CABLE (See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation)
5. INSTALL STEERING WHEEL ASSEMBLY (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
6. INSPECT STEERING WHEEL CENTER POINT (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Installation)
7. INSTALL STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation)
8. INSTALL NO. 2 STEERING WHEEL COVER LOWER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
9. INSTALL NO. 3 STEERING WHEEL COVER LOWER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. INSPECT STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Testing and Inspection/Steering Pad)
12. INSPECT SRS WARNING LIGHT
HINT: (See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System)