Camry V6-3.5L (2GR-FE) (2008)
/Page-1605001.png)
Wheel Speed Sensor: Testing and Inspection
Front Speed Sensor
BRAKE CONTROL: FRONT SPEED SENSOR:
INSPECTION
1. INSPECT FRONT SPEED SENSOR (for BOSCH Made)
(a) Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
-
The surface of the front speed sensor is cracked, dented, or chipped off.
-
The connector or wire harness is scratched, cracked, or damaged.
-
The front speed sensor has been dropped.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
LH
RH
If the value is not as specified, replace the front speed sensor.
2. INSPECT FRONT SPEED SENSOR (for ADVICS Made)
(a) Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
-
The surface of the front speed sensor is cracked, dented, or chipped off.
-
The connector or wire harness is scratched, cracked, or damaged.
-
The front speed sensor has been dropped.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
RH
