Camry V6-3.5L (2GR-FE) (2008)
Connecting Rod Bearing: Specifications
CONNECTING ROD
Connecting rod thrust clearance
Standard ........................................................................................................................................................ 0.15 to 0.40 mm (0.0059 to 0.0157 in.)
Maximum .................................................................................................................................................................................... 0.50 mm (0.020 in.)
Connecting rod oil clearance
Standard .................................................................................................................................................... 0.045 to 0.067 mm (0.0018 to 0.0026 in.)
Maximum ................................................................................................................................................................................ 0.070 mm (0.0028 in.)
Connecting rod out-of alignment
Maximum ............................................................................................................................................... 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Connecting rod twist
Maximum ............................................................................................................................................... 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)
Connecting rod bushing inside diameter ..................................................................................................... 22.005 to 22.014 mm (0.8663 to 0.8667 in.)
CONNECTING ROD CAP BOLT
HINT: The connecting rod cap bolts are tightened in 2 progressive steps.
Step 1
-
Install and alternately tighten the bolts of the connecting rod cap in several steps.
Torque ......................................................................................................................................................................... 25 Nm (255 kgf-cm, 18 ft-lbf)
Step 2
-
Retighten the cap bolts by 90° as shown in the illustration.