Camry V6-3.5L (2GR-FE) (2008)
/Page-655032.png)
E. Temporarily tighten the pulley set bolt.
F. Turn the crankshaft clockwise to set it to the RH block bore center line (TDC/compression).
10. Install the chain tensioner slipper.
11. Install the No. 1 chain tensioner assembly.
A. Move the stopper plate upward to release the lock, and push the plunger deep into the tensioner.
B. Move the stopper plate downward to set the lock, and insert a hexagon wrench into the hole of the stopper plate.
C. Install the chain tensioner with the 2 bolts.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
