Camry V6-3.5L (2GR-FE) (2008)
2.
Remove the No.1 and No.2 instrument cluster finish panel garnish by disengaging the 2 clips.
3.
Remove the floor shift position indicator housing sub-assembly.
For automatic transaxle equipped vehicles remove the floor shift position indicator housing sub-assembly.
A.
Disengage the 6 claws and 3 clips as shown.
B.
Disconnect Seat Heater connector if equipped.
Disconnect each connector.
4.
Remove the upper console panel.
For manual transaxle:
A.
Open the lid of the upper console panel.