Camry V6-3.5L (2GR-FE) (2008)
Fuel Gauge Sender: Testing and Inspection
2GR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY:
INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Remove the fuel sender gauge assembly.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between the terminals 2 (S) and 3 (FE) of connector according to the value(s) in the table below.
Standard resistance:
HINT: If the value is not as specified, replace the fuel sender gauge assembly.