Camry V6-3.5L (2GR-FE) (2008)
(d) Do not disassemble the airbag sensors.
2. INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT
(a) When the airbag has not deployed, confirm the DTCs by checking the SRS warning light. If there is any malfunction in the SRS airbag system,
perform troubleshooting.
(b) When any of the airbags have deployed, replace the airbag sensors and check the installation condition.
3. EXPRESSIONS OF IGNITION SWITCH
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are
used in this section.
4. SRS CONNECTORS
(a) SRS connectors are located as shown in the following illustration.