Camry V6-3.5L (2GR-FE) (2008)
(b) Disconnect the ID instrument panel J/B assembly connector.
(c) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
6. INSPECT ENGINE ROOM JUNCTION BLOCK ASSEMBLY
(a) Remove the H-LP (RL) fuse and H-LP (LL) fuse from the engine room J/B assembly.
(b) Measure the voltage between the loading slot of each fuse and body ground.
Standard voltage:
NG -- REPLACE ENGINE ROOM JUNCTION BLOCK ASSEMBLY (POWER DISTRIBUTOR)
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (FUSE - BODY GROUND)