Camry V6-3.5L (2GR-FE) (2008)
Drive Belt: Service and Repair
Removal
2GR-FE ENGINE MECHANICAL: DRIVE BELT:
REMOVAL
1. REMOVE FRONT WHEEL RH
2. REMOVE FRONT FENDER APRON SEAL RH
3. REMOVE V-BANK COVER SUB-ASSEMBLY (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Removal)
4. REMOVE V-RIBBED BELT
(a) Using SST, release the belt tension by turning the belt tensioner counterclockwise, and remove the V-ribbed belt from the belt tensioner.
SST: 09249-63010
(b) While turning the belt tensioner counterclockwise, align with its holes, and then insert the 5 mm bi-hexagon wrench into the holes to fix the
V-ribbed belt tensioner.