Camry V6-3.5L (2GR-FE) (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna):
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Connect the connector to the tire pressure warning receiver assembly.
(b) Install the tire pressure warning receiver assembly with the bolt
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
2. INSTALL INNER ROOF SIDE GARNISH LH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation)
3. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Fixed Type)/Installation)
4. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type)
5. INSTALL REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)
6. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Fixed Type)/Installation)
7. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly (for Fold Down Seat Type)/Installation)
8. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly (for Fold Down Seat Type)/Installation)
9. INSTALL REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly
(for Reclining Seat Type)/Installation)
10. INSTALL REAR SEATBACK COVER (for Reclining Seat Type)
11. INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)
12. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type) (See: Body and Frame/Seats/Service and Repair/Rear
Seat Assembly (for Reclining Seat Type)/Installation)
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure)