Camry V6-3.5L (2GR-FE) (2008)
(g) WAVEFORM 7
(1) Purge VSV for EVAP system operation signal
HINT: If the waveform is not similar to that shown in the illustration, check the waveform again after idling for 10 minutes or more.
(h) WAVEFORM 8
(1) Vehicle speed signal
-
The wavelength becomes shorter as the vehicle speed increases.
-
Depending on the vehicle, the output waveform voltage may rise to 12 V if influenced by optionally installed systems.
(i) WAVEFORM 9
(1) Throttle drive motor operation signal (positive terminal)
HINT: The duty ratio varies depending on the throttle actuator operation.