Camry V6-3.5L (2GR-FE) (2008)
/Page-962025.png)
(a) Disconnect the A/C amplifier connector (E38).
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
HINT: Measure the resistance with the No. 2 CAN J/C connector (E41) disconnected.
NG -- REPAIR OR REPLACE A/C AMPLIFIER BRANCH WIRE OR CONNECTOR
OK -- REPLACE A/C AMPLIFIER
11. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (ECM MAIN BUS WIRE)
(a) Disconnect the No. 2 CAN J/C connector (E40) (rear of the vehicle).
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
