Camry V6-3.5L (2GR-FE) (2008)
/Page-963010.png)
(a) without Smart Key System
(1) Disconnect the 1F J/B connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(3) Measure the voltage according to the value(s) in the table below.
Standard voltage:
*: TMC Made only
(4) Reconnect the J/B connector.
(b) with Smart Key System
(1) Disconnect the E8 main body ECU connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard resistance:
