Camry V6-3.5L (2GR-FE) (2008)
/Page-964004.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
4. SKID CONTROL ECU WITH ACTUATOR (w/ VSC)
(a) TMC made
(1) Disconnect A26 connector from the skid control ECU.
(2) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) TMMK made
(1) Disconnect the A60 connector from the skid control ECU.
