Camry V6-3.5L (2GR-FE) (2008)
Fuel Injector: Service and Repair
Installation
2GR-FE FUEL: FUEL INJECTOR:
INSTALLATION
1. INSTALL FUEL INJECTOR ASSEMBLY
(a) Apply a light coat of spindle oil or gasoline to new O-rings, and install them to each injector.
(b) Apply a light coat of spindle oil or gasoline where the fuel delivery pipe contacts the O-ring.
(c) Push the fuel injector while turning it to install the injector in the fuel delivery pipe.
(d) Position the fuel injector connector outward.
NOTICE:
-
Be careful not to twist the O-ring.
-
After installing the fuel injector, check that it turns smoothly. If not, reinstall it with a new O-ring.
(e) Install 6 new insulators to the intake manifold.
(f) Place the fuel delivery pipe which has the 6 fuel injectors installed to it in position on the intake manifold.
NOTE: Be careful not to drop the fuel injectors when installing the fuel delivery pipe.
(g) Temporarily install the 5 bolts which are used to hold the fuel delivery pipe to the intake manifold.
NOTE: After installing the fuel injectors, check that they turns smoothly. If not, reinstall the injectors with new O-rings.
(h) Tighten the 5 bolts which are used to hold the fuel delivery pipe to the intake manifold.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)