Camry V6-3.5L (2GR-FE) (2008)
9. Remove the IG1 Relay from the Junction Block.
10. Install the new IG1 Relay.
A. Install the new IG1 Relay to the end of the sub-harness.
B. Install the other end of the sub-harness to the Junction Block.
9. Remove the IG1 Relay from the Junction Block.
10. Install the new IG1 Relay.
A. Install the new IG1 Relay to the end of the sub-harness.
B. Install the other end of the sub-harness to the Junction Block.