Camry V6-3.5L (2GR-FE) (2008)
/Page-8001.png)
Brake Fluid Pump Relay: Testing and Inspection
BRAKE CONTROL: ABS MOTOR RELAY (w/ VSC):
ON-VEHICLE INSPECTION
1. INSPECT VSC NO. 1 (FAIL SAFE) RELAY
(a) Remove the VSC NO. 1 (fail safe) relay.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the value is not as specified, replace the VSC NO. 1 (fail safe) relay.
2. INSPECT VSC NO. 2 RELAY
(a) Remove the VSC NO. 2 relay.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the value is not as specified, replace the VSC NO. 2 relay.
