Camry V6-3.5L (2GR-FE) (2008)
(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:
OK -- INSPECT ENGINE ROOM JUNCTION BLOCK ASSEMBLY
NG -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (BATTERY - ENGINE ROOM J/B ASSEMBLY)
(a) Disconnect the 1G engine room J/B assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. INSPECT ENGINE ROOM J/B BLOCK ASSEMBLY
(a) Reconnect the 1G engine room J/B assembly connector.
(b) Disconnect the 1D engine room J/B assembly connector.
(c) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPLACE ENGINE ROOM JUNCTION BLOCK ASSEMBLY (POWER DISTRIBUTOR)
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (ENGINE ROOM J/B ASSEMBLY - INSTRUMENT PANEL J/B ASSEMBLY)
(a) Reconnect the 1D engine room J/B assembly connector.