toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine Control Module|Page 296 > < Engine Control Module|Page 294
Page 10
background image

(g) WAVEFORM 7

(1) Purge VSV for EVAP system operation signal

HINT: If the waveform is not similar to that shown in the illustration, check the waveform again after idling for 10 minutes or more.

(h) WAVEFORM 8

(1) Vehicle speed signal

-

The wavelength becomes shorter as the vehicle speed increases.

-

Depending on the vehicle, the output waveform voltage may rise to 12 V if influenced by optionally installed systems.

(i) WAVEFORM 9

(1) Throttle drive motor operation signal (positive terminal)

HINT: The duty ratio varies depending on the throttle actuator operation.

Engine Control Module|Page 296 > < Engine Control Module|Page 294