Camry V6-3.5L (2GR-FE) (2008)
Repairs and Inspections Required After a Collision: Service and Repair
Center Airbag Sensor Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY:
ON-VEHICLE INSPECTION
1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check (See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis
System).
2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check (See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis
System).
3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
(a) Replace the center airbag sensor assembly.
CAUTION: Be sure to follow the correct removal and installation procedures.
HINT: The center airbag sensor assembly should be replaced after any of the airbags has deployed, as it has been subjected to the impact.