Camry V6-3.5L (2GR-FE) (2008)
Remote Switch: Service and Repair
Removal
AUDIO / VISUAL: STEERING PAD SWITCH:
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE NO. 3 LOWER STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal)
3. REMOVE NO. 2 LOWER STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal)
4. REMOVE STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal)
5. REMOVE STEERING PAD SWITCH LH (for 4 Spoke)
(a) Disconnect the pad switch connector from the spiral cable.
(b) Remove the screw.
(c) Disengage the 2 pins and remove the steering pad switch LH.
6. REMOVE STEERING PAD SWITCH ASSEMBLY (for 4 Spoke)
(a) Disconnect the pad switch connector from the spiral cable.
(b) Remove the screw.
(c) Disengage the 2 pins and remove the steering pad switch.
(d) Remove the screw.
(e) Disengage the 2 pins and remove the steering pad switch assembly.
7. REMOVE STEERING PAD SWITCH LH (for 3 Spoke)
(a) Disconnect the pad switch connector from the spiral cable and disengage the clamp.