Camry V6-3.5L (2GR-FE) (2008)
/Page-399002.png)
(a) Disconnect the connector.
(b) Using a "torx" socket wrench (T30), remove the "torx" screw and seat position sensor with the seat slide position sensor protector.
(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.
16. REMOVE SEAT POSITION SENSOR (for Power Seat)
(a) Disconnect the connector.
(b) Using a "torx" socket wrench (T30), separate the "torx" screw and seat position sensor with the seat slide position sensor protector.
(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.
