Camry V6-3.5L (2GR-FE) (2008)
(j) Connect the magnetic clutch connector to the compressor and magnetic clutch.
2. INSTALL V-RIBBED BELT (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Installation)
3. INSTALL RADIATOR ASSEMBLY (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
4. INSTALL FAN SHROUD (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
5. INSTALL RADIATOR SUPPORT UPPER (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
6. CONNECT NO. 1 OIL COOLER OUTLET TUBE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
7. CONNECT NO. 1 OIL COOLER INLET TUBE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
8. CONNECT RADIATOR OUTLET HOSE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
9. CONNECT RADIATOR INLET HOSE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
10. CONNECT RADIATOR RESERVE TANK HOSE (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and
Replacement/Installation)
11. INSTALL FRONT BUMPER ENERGY ABSORBER (See: Body and Frame/Bumper/Front Bumper/Service and Repair/Reassembly)
12. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light) (See: Body and Frame/Bumper/Front Bumper/Service and Repair/Installation)
13. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light) (See: Body and Frame/Bumper/Front Bumper/Service and Repair/Installation)
14. INSTALL NO. 1 AIR CLEANER INLET (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation)
15. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation)
16. INSTALL AIR CLEANER INLET ASSEMBLY (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
18. ADD ENGINE COOLANT (See: Engine, Cooling and Exhaust/Cooling System/Coolant/Testing and Inspection)
19. CHECK FOR ENGINE COOLANT LEAKS (See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection)
20. INSTALL V-BANK COVER SUB-ASSEMBLY (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
21. INSTALL COOL AIR INTAKE DUCT SEAL (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
22. INSTALL FRONT FENDER APRON SEAL RH
23. INSTALL ENGINE UNDER COVER RH
24. INSTALL ENGINE UNDER COVER LH
25. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
26. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
27. INSTALL FRONT WHEEL RH (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service
and Repair/Installation)