Camry V6-3.5L (2GR-FE) (2008)
Ignition Switch: Testing and Inspection
Engine Switch (w/ Smart Key System)
2GR-FE STARTING: ENGINE SWITCH (w/ Smart Key System):
INSPECTION
1. INSPECT ENGINE SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the engine switch.
(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.
Standard resistance:
If the result is not as specified, replace the engine switch.