Camry V6-3.5L (2GR-FE) (2008)
Torque: 13 Nm (130 kgf-cm, 9 ft-lbf)
2. INSTALL AIR CLEANER BRACKET
(a) Install the air cleaner bracket with the 3 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 in-lbf)
(b) Install the wire harness clamp.
3. INSTALL NO. 1 AIR CLEANER INLET (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation)
4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation)
6. INSTALL AIR CLEANER INLET ASSEMBLY (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
7. INSTALL COOL AIR INTAKE DUCT SEAL (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation)
9. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION (See: Testing and Inspection/On-Vehicle Inspection)
10. INSPECT SHIFT LEVER POSITION (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift
Cable/Adjustments)
11. ADJUST SHIFT LEVER POSITION (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift
Cable/Adjustments)