Camry V6-3.5L (2GR-FE) (2008)
Tire Pressure Warning Reset Switch: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a) Engage the 2 claws to install the tire pressure warning reset switch.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation)
3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation)
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation)
5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation)
6. INSTALL FRONT DOOR SCUFF PLATE RH (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation)
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INITIALIZE SYSTEM
NOTE: Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.
HINT: (See: Tire Monitoring System/Testing and Inspection/Programming and Relearning/Initialization)
9. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (See: Tire Monitoring System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure)