Camry V6-3.5L (2GR-FE) (2008)
(d) Apply adhesive (Adhesive: TOYOTA genuine windshield glass adhesive or equivalent).
(1) Cut off the tip of the cartridge nozzle, as shown in the illustration.
HINT: After cutting off the tip, use all adhesive within the time described in the table below.
Usage time frame:
(2) Load the sealer gun with cartridge.
(3) Apply adhesive to the back window glass, as shown in the illustration.
Standard dimension:
(e) Install the back window glass assembly.
(1) Using a suction cup, position the back window glass so that the matchmarks are aligned, and press it in gently along the rim.
NOTICE:
-
Check that the back window glass stoppers are attached to the vehicle body correctly.
-
Check the clearance between the vehicle body and back window glass.
(2) Lightly press the front surface of the back window glass to ensure a close fit.
HINT: Press the glass with force of 98 N (10 kgf, 22 lb) or more.