Camry V6-3.5L (2GR-FE) (2008)
/Page-2784005.png)
(4) Remove the windshield glass assembly.
(b) Using a brush, coat the installation surface on the vehicle body with Primer M.
-
Do not coat the adhesive with Primer M.
-
Do not apply too much primer.
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer M for later use.
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(c) Using a brush or sponge, coat the application area of adhesive with Primer G.
NOTICE:
-
Do not apply too much primer.
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
HINT:
-
Apply Primer G onto the ceramic notches.
-
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
Standard dimension:
(d) Apply adhesive (Adhesive: TOYOTA genuine windshield glass adhesive or equivalent).
