Camry V6-3.5L (2GR-FE) (2008)
(b) Connect the connector.
3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(a) Engage the 4 claws and install the cowl top ventilator louver sub-assembly.
(b) Install the 2 clips.
4. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
(a) Engage the claw and install the front fender to cowl side seal RH.
5. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
(a) Engage the claw and install the front fender to cowl side seal LH.
6. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
(a) Operate the wiper and stop the windshield wiper motor at the automatic stop position.
(b) Clean the wiper arm serrations.
(c) When reinstalling:
(1) Clean the wiper pivot serrations with a wire brush.