Camry CE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
2. REMOVE ECM
a. Disconnect the connectors.
b. Remove the 2 nuts and ECM.
3. DISCONNECT AIR INLET DAMPER CONTROL CABLE
HINT: At the in time of installation, please refer to following item.
After connection, inspect the air inlet control lever operation.
4. REMOVE A/C AMPLIFIER.
a. Disconnect the connector.
b. Release the 2 claws and pull out the amplifier.
5. REMOVE CONNECTOR BRACKET SET SCREWS
9. REMOVE BLOWER UNIT
a. Disconnect the connector.
b. Disconnect the thermistor connector clamp.
c. Remove the 2 screws, bolt and nut, then remove the blower unit.
INSTALLATION
Installation is the reverse order of removal.
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE BLOWER MOTOR
Remove the 3 screws and blower motor.
2. REMOVE BLOWER RESISTOR
Remove the 2 screws and blower resistor.
REASSEMBLY
Reassembly is in the reverse order of disassembly.