Camry CE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1861003.png)
CAUTION:
-
Never dispose of a side airbag assembly which has an undeployed airbag.
-
The airbag produces a sizeable exploding sound when it deploys, so perform the operation out of doors and where it will not create a nuisance to
nearby residents
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool), perform the operation in a place away from electrical
noise.
SST 09082-00700
-
When deploying an airbag, perform the operation at least 10 m (33 ft) away from the airbag assembly.
-
The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling side airbag assembly with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a side airbag assembly with the deployed airbag.
HINT: Have a battery ready as the power source to deploy the airbag.
A. Check functioning of the SST.
SST 09082-00700
B. Disconnect the side airbag connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
C. Install the SST.
