Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-490005.png)
c. Check that timing marks of the camshaft timing pulleys and No.3 timing belt cover are aligned.
If not, turn the crankshaft 1 revolution (360°).
d. Remove the crankshaft pulley bolt.
15. If reusing timing belt, check installation marks on timing belt.
Check that there are 3 installation marks and front mark on the timing belt.
If the installation and front marks have disappeared, before removing the timing belt, place 3 new installation marks on the timing belt to match the
timing marks of the timing pulleys, and place a new front mark on the timing belt.
16. Remove timing belt tensioner.
Alternately loosen the 2 bolts, and remove them, the tensioner and dust boot.
17. Remove timing belt.
18. Remove camshaft timing pulleys.
a. Using (SST) 09249-63010, 09960-10010 (09962-01000, 09963-01000), remove the bolt and RH timing pulley.
