Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-352001.png)
Drive Belt: Service and Repair
REMOVAL
REMOVE DRIVE BELT
a. Loosen the pivot bolt and adjusting lock bolt.
Torque:
Pivot bolt: 56 N.m (570 kgf.cm, 41 ft.lbf)
Adjusting lock bolt: 18 N.m (185 kgf.cm, 13 ft.lbf)
b. Loosen the drive belt tension by adjusting bolt and remove the drive belt
INSTALLATION
Installation is in the reverse order of removal.
