Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
Vacuum Reservoir: Testing and Inspection
VACUUM TANK INSPECTION
LOCATION: The LH side member under the battery tray.
(a) Check that air flows from port B to port A.
(b) Check that air does not flow from port A to port B.
(c) Plug port B with your finger and apply 26.7 kPa (200 mm Hg, 7.9 in.Hg) of vacuum to port A and check that there is no change is vacuum
after one minute.
If the operation is not as specified, replace the vacuum tank.