Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
3. INSTALL FRONT SEAT
a. Slide the front seat to the most front position.
NOTICE: Make sure that seat adjuster locks.
b. Without holding the seat track handle, mount the seat to the vehicle.
HINT: If holding the seat track handle, the adjusted most front position slip off.
c. Tighten the bolts on the rear side temporarily, from the bolt on the inner side tighten completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
d. Slide the seat to the rearmost position to install the bolts on the front side.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
e. w/ Power Seat Adjuster:
Connect the side airbag connector and power seat connector.
f.
w/o Power Seat Adjuster:
Connect the side airbag connector.