toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Side Airbag Electrical Connectors|Page 6889 > < Side Airbag Electrical Connectors|Page 6887
Page 1
background image

Side Air Bag: Service and Repair
Disposal

HINT:  When scrapping vehicles equipped with an SRS or disposing of the side airbag assembly always first deploy the airbag in accordance with the
procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT of TOYOTA MOTOR SALES, U.S.A.,
INC.

CAUTION:

-

Never dispose of a side airbag assembly which has an undeployed airbag.

-

The airbag produces a sizeable exploding sound when it deploys, so perform the operation out of doors and where it will not create a nuisance to
nearby residents.

-

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool), perform the operation in a place away from electrical
noise.
SST 09082-00700, 09082-00750

-

When deploying an airbag, perform the operation at least 10 m (33 ft) away from the airbag assembly.

-

The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.

-

Use gloves and safety glasses when handling side airbag assembly with the deployed airbag.

-

Always wash your hands with water after completing the operation.

-

Do not apply water, etc. to a side airbag assembly with the deployed airbag.

Side Airbag Electrical Connectors|Page 6889 > < Side Airbag Electrical Connectors|Page 6887