Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-228001.png)
Oxygen Sensor: Testing and Inspection
Air-Fuel Ratio (A/F) Sensor - California
INSPECTION
INSPECT HEATER RESISTANCE OF A/F SENSORS
(Bank 1 sensor 1, Bank 2 Sensor 1)
(a) Disconnect the A/F sensor connector.
(b) Using an ohmmeter measure the resistance between terminals +B and HT.
Resistance: 0.8 - 1.4 ohms at 20°C (68°F)
If the resistance is not as specified, replace the sensor.
Torque: 44 N.m (440 kgf.cm, 31 ft.lbf)
(c) Reconnect the A/F sensor connector.
