Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
a. Using SST, remove the bearing.
SST 09285-46011
b. Using a press, press in a new bearing.
4. REPLACE MAGNETIC SWITCH TERMINAL KIT PARTS
a. Remove the 3 bolts, end cover, gasket and plunger.
b. Using vernier calipers, measure the contact plate for depth of wean
Maximum wear: 0.9 mm (0.035 in.)
If the depth of wear is greater than the maximum, replace the contact plate.
c. Remove the terminal kit parts.
1. Using SST, loosen the terminal nuts.
SST 09810-38140
2. Terminal C:
Remove the terminal nut, wave washer, terminal insulator (outside), O-ring, terminal bolt, contact plate and terminal insulator (inside).
3. Terminal 30: