Camry CE Sedan V6-3.0L (1MZ-FE) (1998)
f.
Using SST and a press, install a new tapered roller bearing outer race.
SST 09316-60011 (09316-00011, 09316 - 00041)
g. Install the oil baffle.
HINT: Install the oil baffle projection into the case side cut out.
h. Using SST and a hammer, drive in a new oil seal.
SST 09223 - 15020, 09950-70010 (09951 - 07150)
i.
Coat the lip of oil seal with Multi-Purpose (MP) grease.
5. Transaxle Case Side:
If necessary, replace oil seal and tapered roller bearing outer race.
a. Remove the 4 bolts and 3 nuts.
b. Using a plastic hammer, tap the stud bolt and remove the transaxle case cover.
c. Using a screwdriver and hammer, drive out the oil seal from the transaxle case cover.