Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
1. Install water pump to water pump cover.
Install a new gasket and the water pump with the 3 bolts.
Torque: 8.8 Nm (78 inch lbs.)
2. Install water pump and water pump cover assembly.
(a)
Install new O-ring and gasket to water pump cover.
(b) Install a new O-ring to the water bypass pipe.
(c)
Apply soapy water to the O-ring on the water bypass pipe.
(d) Connect the water pump cover to the water bypass pipe. Do not install the nuts yet.
(e)
Install the water pump with the 3 bolts. Tighten the bolts in the sequence shown.
Torque: 8.8 Nm (78 inch lbs.)
(f)
Install the 2 nuts holding the water pump cover to the water bypass pipe.
Torque: 9.3 Nm (82 inch lbs.)