Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
^
After aligning the match marks, hold the timing belt. And turn the crankshaft pulley clockwise, and align its groove with timing mark
"O" of the No.1 timing belt cover.
When match marks is misaligned counterclockwise:
^
Align the match marks by pulling the timing belt up on the No.1 idler pulley side while turning the crankshaft pulley clockwise.
^
After aligning the match marks, hold the timing belt. And turn the crankshaft pulley counterclockwise, and align its groove with timing
mark "O" of the No.1 timing belt cover.
b. Remove the pulley bolt.
c. Using SST, remove the pulley. SST 09950 - 50010 (09951 - 05010, 09952-05010, 09953-05010, 09953-05020, 09954-05020 for type A,
0995W5010 for type B)
NOTE: Either of 2 types of pulley may be used, each with its own bolt size, Type A and type B. When re-using timing belt: Remove the
pulley without turning it.
