toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air Door Actuator / Motor, HVAC|Testing and Inspection|Page 6902 > < Wheel Fastener|Front|Page 6896
Page 1
background image

Air Door Actuator / Motor: Testing and Inspection

INSPECT SERVOMOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 7.

b. Connect the negative (-) lead from the battery to each terminal and check that the shaft rotates to each position, as shown in the chart.

If operation is not as specified, replace the servomotor

Air Door Actuator / Motor, HVAC|Testing and Inspection|Page 6902 > < Wheel Fastener|Front|Page 6896