Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Control Assembly: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE A/C SWITCH AND DEFOGGER SWITCH
Using a screwdriver, release the claw and pull out the switch backward.
REASSEMBLY HINT: Tape the screwdriver tip before use.
2. REMOVE THESE PARTS:
a. Heater control knobs
b. Heater control cable
3. REMOVE BLOWER SPEED CONTROL SWITCH
Remove the 2 screws and pull out the switch.
4. REMOVE MODE SWITCH
Remove the 2 screws and pull out the switch.
5. REMOVE HEATER CONTROL NAME SHEET
a. Remove the 2 screws.
b. Using a screwdriver, release the 4 claws and heater control name sheet.
REASSEMBLY HINT: Tape the screwdriver tip before use.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
INSTALLATION
Installation is in the reverse order of removal.
HINT: If cable's adjustment is in need, refer to "ADJUSTMENT".